Just Do IT…

October 27, 2008 in Hong Kong and San Jose, California news –

Hao Peng Hong Kong Science and Technology Co., Ltd. (American Stock Exchange ticker symbol: HPJ) specializes in nickel-metal hydride (Ni-MH) batteries, lithium (Li-ion) batteries and related products in the development, production and sales. Today, the company announced that its located in Huizhou, Guangdong Province, China, a new nickel-metal hydride dell g5266 battery plant started, the plant has been certified in accordance with the environment through the construction of detailed planning to start construction.

In February 2007, the company in Huizhou City, Guangdong Province, China Hui City lake Ma Zhen new industrial development zone 26,000,000 yuan to purchase 1,360,000 square feet to the right. The real estate and related land-use rights for industrial use in order to authorize the company to carry out development and construction, will allow the transfer of land and rent, and if necessary, can be used as collateral.

Hao Peng Hong Kong Science and Technology Co., Ltd. is currently rely on the Shenzhen City in Guangdong Province, the factory producing nickel-metal hydride dell Inspiron 9400 battery and lithium dell Latitude C640 battery . Huizhou new plant is expected to be completed in the fourth quarter of 2009, when all production will move to new premises.

Hao Peng Hong Kong Science and Technology Co., Ltd. Chairman and Chief Executive Officer sony vgp-bps5 battery of Pan Yu-party, said: “We are first-rate new plant will provide 3 times the current capacity, which means that production capacity can be almost every day from the current 600,000 to 1,600,000 per day. We have access to the Chinese government’s environmental certification, the project is expected to be completed successfully, to start trial production by the end of 2009. ”

Hao Peng on the Hong Kong Science and Technology Co., Ltd.

Hong Kong Science and Technology Hao Peng engaged in a variety of electronic equipment for the nickel metal hydride (Ni-MH) and lithium-ion (Li-ion) rechargeable sony VGP-BPS5 battery and related laptop battery product development, manufacturing and marketing. Hong Kong Science and Technology Hao Peng most of the products sold around the world, including the United States, Europe, China, Hong Kong, Taiwan and Southeast Asian markets.

Now use the notebook more and more people, as the notebook one of the main components of lithium battery problems have also increased. So how should make good use of the laptop’s lithium batteries do? Is to grasp two points:
1. Due to current red discharge.
2. To minimize the discharge less than the over-charge or discharge.
While the battery is a consumable, lithium-ion battery is no exception. However, no one wants to use the battery up the fine spirit of God, not the age that you snap on the end, no one wants to own the very beginning, half dead battery does not pull a living, this has been the rub in 2023, making good You realize how little value is the case, you do not say that?
Well, get down to business, following the battery began to speak. To explain, is limited to lithium-ion battery.
Appropriate to charge and discharge current
Literature in general and the state on the standard lithium-ion battery that the lithium-ion battery charge current should be between 0.2C to 1C. It is said that the capacity of the battery charge current, such as your battery is 4AH, then the 0.2C charge current is 0.2X4 = 0.8A, in other words, the charge current should be between 0.8 to 4A. In general, in charge current to the extent permitted by the smaller the better, rechargeable lithium-ion battery to start charging current stage should be, in my IBM R31, this current is 2.8A or so, which is equivalent to 0.7C, is charging its own circuit Control, can not be set. This indicator does not charge more than the standard, but do more, especially when using the battery capacity decline for some time after the charge current may be more than 1C. Now the length of time charge notebook users have also become targets regardless of the manufacturers were forced to charge current set so high.
So the first step is to reduce the charge current. I have friends working in the laboratory, a variety of readily available equipment, where he is on trial for a moment. Power output in the first string on a try resistance, the outcome of the current is reduced, but became intermittent charge, which is not a good thing. Through trial and error, 4 Ohm is a more ideal value, this time around 0.8A charge current is, very stable. This is only run through the machine’s current power supply interface, the battery charge current estimated number of large, it should be slightly larger than 0.2C. Specific to a different machine, this value may be different. With the addition of the increase in battery voltage, charge current will be reduced, but decreased only slightly less than 0.05A. In such a state of charge, charging circuit seems to be not working, the battery indicator light is not bright. Such as the battery voltage up to 12.6V, charging circuits came into play into the battery trickle charge, at this time whether the series has resistance does not matter, the charge current by the charge control circuit, the last full charge after the end of the circuit automatically charge. The entire charge time is about 5.5 hours, if not resistance, charging time is about 3.5 hours.
Lithium-ion batteries is very precious, good charge control circuit is necessary. This charging method can reduce the charge current, battery life, while at the same time the use of the books of the original charge of the charge control circuit, it is also relatively simple to achieve, just buy a plug (from the power supply into books The kind, it is best to buy two, referred to the back of a method also used to good quality) and a can of resistance, resistance attention to the larger head, above, after all, there are about 2W of power Otherwise, it would be more heat resistance, the best use of their constant resistance to be a wire, the wire resistance of the resistance and temperature has nothing to do basic. But the shortcomings of this approach is obvious, that is not in charge of the work at the same time with books. Another charge when there will be a strange phenomenon, I do not write omitted here, you try to know, the good news is this phenomenon into the trickle charge after the state disappeared. Charging time is not a big deal, anyway, before the charge to sleep at night, wake up the next day on the charge Well, of course, if you are a person who goes to bed to bed or short-time special, it is a different matter. f4098a, f4809a, f4812a, 319411-001, presario 2100, presario 2500 Small charge current issue is resolved, the issue is now the turn of the discharge. In fact, this is difficult, after all, the book is designed to work, the discharge current will work with the state vary, here referred to the method used to be limited to special battery capacity to resume operation.
Start machines, power management settings do not always sleep (standby) and hibernation (hibernate), as are most other power-saving mode, including the CPU speed, hard drive shut down, turn off the display, and so on, and TP in the management process Do not have to shut down some of the hardware, such as sound cards and so on, and then open the battery status display window, to run in front! ! ! The closure of other programs, in particular, screen saver and the other from time to time to run the program! ! Do not use the machine, do not close the lid and let the battery discharge end (not to discharge the minimum value set to 0, I set up 3%). Display and hard drive shut down after the discharge current is about 0.5A, this is my IBM R31 can be achieved at the minimum discharge current, battery discharge to the minimum value after the machine will automatically shut down. Continue to discharge the entire time about more than 4 hours, according to your battery capacity may be different, this time to sleep is also a way to use the pass.
Well, the last to stress that the above-mentioned method is not dead, especially the discharge, there are ten time will be able to do so, otherwise the battery still doing? Charging the best use of small current charge, of course, if the battery urgent need for a direct power supply to plug inserted in the book on it.
I used this method of battery, put a charge 14 times the capacity has been maintained at over 45, and the design of the battery capacity is 43.2, which is also declining, but this release Filling time after the restoration of.
Speaking at the beginning of the two points, one appropriate charge and discharge, and the other is not to discharge less than the charge, discharge following a look at how to solve the problem of lack of charge on it:
To minimize the discharge less than the over-charge or discharge
In fact, a very good solution to the excessive discharge, not to terminate the limits of the discharge can be so low, I have been using 3%. f2299a, f3172a, pavilion zt1000 Often do not use batteries may be a long time, such as the battery remaining 70%, if the power switch, then the battery is automatically recharged, there will be no such a cycle, although battery life is not a cycle in order to set the absolute number of dead, But always it will reduce the capacity of the battery, lithium-ion battery was no memory effect, but it is just a memory effect it is relatively low. Unfortunately, IBM did not provide the solution to the shortage of charge-discharge method, but provides a solution to this problem. And that is what I found on the R31 may not necessarily suitable for other machines, but the method should also be more or less the same, you try not to forget after it posted for all to share.
R31 charging circuit based on the situation of the power to decide whether to charge the battery. Power output voltage is 16V, the error of plus or minus 0.2V, if the voltage lower than 15.5V, so not to charge the battery charging circuit, and the book can work, which is provided by IBM to solve the problem. But this is the basis of vulnerability, as if the lower voltage 15.2V, books will be converted to use battery-powered, plug in the power supply even if the books will be of no avail. In other words, we can toss the space is 0.3V.
If you can find a 15.5V, over the current 3A switching power supply, then the problem is solved, otherwise please continue to look down.
The power to reduce the output voltage 0.5V is not an easy thing, the series resistance is not ideal because of the resistance as the current size of the voltage changes. I use the diode rectifier to permit the adoption of the current 2A above, otherwise the heat pipe. Rectifier diode forward voltage drop in the 0.7 to 0.5V, just to meet the requirements. Now this type of electronic tubes in the market are so high, the prices of less than 2 yuan. Specific to a different book may be different, it is best to install on-hand when there is a digital multimeter Test. Pipe is being in the series of power output, and then followed his own to buy a power plug inserted in the book. Then the anti-diode does not matter, be it the script does not work, and then in turn connected to it.

Like, power output voltage drop of 0.5V or so, if the drop too much, the book will switch to the battery, if the drop too low, the book will charge the battery, in particular how much you want to book their own tried to know.
Of course, if your battery has been full of this circuit there is no need, you can not have it, directly to the power output in the next book on it. f2019, f2019a, f2019b, omnibook 6000 Come to an end, the beginning of the two issues are resolved. Now you see the results of the test, it is estimated that in the book different results could be different, the best ones to take a circuit to try to avoid it took 10 innocent money
Finally, I wish you good luck! You make good use of lithium batteries it!
To remind:
In the modified plug when the mistake is easy to engage in anti-polar (diodes engage in anti-polarity does not matter), so you must double-check by measuring multimeter and a different color of the wire connection is negative. I do not know engage in anti-polarity power supply will not burn the books, did not try!

1, for a new battery charge
In the use of lithium batteries should be noted that for a period of time after the battery is placed into hibernation, lower than normal capacity at this time, the time has also come to shorten. However, lithium batteries can easily activated, as long as after 3-5 times the normal charge-discharge cycle of the battery can be activated, the resumption of normal capacity. As the toshiba PA3384U-1BRS battery lithium own characteristics, its decision is almost no memory effect. Therefore, cell phone users in a new lithium battery in the activation process does not require special methods and equipment. Not only is the theory that, from my own practice, from the very beginning, the use of standard methods of charging that “activation” is the best way.
Lithium batteries for the “activation”, a large number of claims: the time to charge more than 12 hours, repeated three times to do in order to activate the battery. “The first three necessary and sufficient to charge more than 12 hours”, it is obvious from the nickel battery (such as nickel-cadmium and nickel metal hydride) inherited. This is why it can be said is the beginning of miscommunication. Lithium batteries and nickel battery charge and discharge characteristics of a very big difference, but also very clear to tell you that I have had access to all the serious official stressed that all technical information and charge-off will discharge lithium batteries, especially lithium liquid Ion battery causing great harm. According to the charge and therefore the best time and method of charging standards, in particular for not more than 12 hours of super-long charge. Typically, the statement introduced mobile phone charging method is suitable for the mobile phone standard method of charging.
In addition, the lithium battery in the phone or battery charger will automatically stop after a charge, there is no electricity nickel charger for 10 hours the so-called “trickle” charge. In other words, if your lithium batteries in full, on the white charger is also sufficient. And we can not guarantee that no one ibm ThinkPad T60 battery charge and discharge protection circuit features and never change the quality of safety, so your batteries will be in the long-term hovering on the brink of danger. This is also another charge against the chief reason.
In addition to certain mobile phones, the charge for more than a certain amount of time, if not remove the charger, this time not only to stop charging system, will be the beginning of discharge - charge cycle. This is perhaps the manufacturer has its own purpose, it is clear that on the phone and battery / charger is the life span of a negative. At the same time, long charging would take a long time, often at night, and to our country’s power grid situation, at night in many parts of the relatively high voltage, but also volatile. Said earlier, the lithium battery is very delicate than nickel in the electric charge and discharge aspects of fluctuations in the capacity of resistance is much less, so this brings additional risk.
In addition, can not be ignored other aspects of a lithium battery that is not the same for over-discharge, over-discharge of lithium batteries is also very unfavorable. This leads to the following question.

2, in normal use when the charge should be
In our forums, often see this as the number of charging and discharging is limited, so should the cell phone battery power used up as much as possible and then charge. But I find on a lithium-ion ibm 40y6797 battery charge and discharge cycle test table, on the life cycle of figures is as follows:
Life cycle:> 1000 cycle life:> 200
DOD is the depth of the discharge of which the initials. Can be seen from the table, the number of rechargeable and about the depth of discharge, 10% DOD at the time of the life cycle than 100% DOD’s a lot longer. Of course, if the actual charge equivalent to the total capacity of the relative: 10% * 1000% * 100,100 = 200 = 200, which is the complete charge and discharge, or better than some, but in front of friends do say that some of the amendments: normal Under the circumstances, you should have a reservation in accordance with the remaining battery power and then run out of filling the principle of charging, but if your battery is expected in the first 2 days you can not adhere to the whole day, should start on time charge, of course, if you are willing to back A charger to the office and when Bielun.
And you need to charge in order to cope with the anticipated upcoming busy communications will lead to an important event, even if there are a lot of battery power over time, then you just charge ahead of time because you do not have a real loss “1″ sub-charge cycle life , That is, “0.x” times, but often this will be a very small x.
The remaining battery power and then run out of charge to the principle does not mean that you go to the extreme. And charging the same length of a widespread view that “as far as possible the cell phone batteries run out of power, it is best to use automatic shutdown.” This is only a matter of fact on nickel batteries, to avoid occurrence of memory effect, unfortunately, it is also spread of lithium batteries on this. It has been too low because the cell phone battery warning appears, do not continue to use the charge has been used in automatic shutdown of the case. The outcome of this case, the phone was in charge of the boot in and there was no response, had to give customer service overhaul. In fact, this is due to the ibm 40Y6799 battery as a result of excessive discharge and led to the low voltage that does not have the normal charge of the boot and conditions.
Lithium batteries for mobile phones boils down to the correct approach, I lithium batteries used in mobile phone charging and discharging of the most important tips are:
1, in accordance with the standards and procedures, charging time, even before the three to do so;
2, When the phone prompts when electricity is too low and should start charging as much as possible in a timely manner;
3, lithium batteries do not need to activate the special method, in a normal cell phone use in lithium batteries would be natural to activate. If you insist on spreading the use of “three times before the 12-hour long activation charge” approach, in fact there will not be the effect.
As a result, all 12 hours long pursuit of the lithium batteries and rechargeable cell phone used in automatic shutdown, are wrong. If you are used to be in accordance with the wrong done, please correct in a timely manner, perhaps not too late.
Of course, cell phones and chargers to protect themselves and control the quality of a good circuit, for the protection of lithium batteries or have guaranteed. Therefore, understanding the rules of the charge is the key, in some cases also may make some concessions. For example, you found your cell phone the night before bed charge, you can also start charging before going to bed. The crux of the matter is that you should know what is the right thing to do, and not in accordance with the deliberately wrong to do.
8 Apple iPhone mobile phone ibm thinkpad r60 battery life 675 days Thu, 26 Jul 2007 00:40:45 +0800 Apple iPhone mobile phone is really a lot of press recently, PC MAG and even an in-depth study about the Apple iPhone’s battery life. They believe in the best case, iPhone’s battery can only be 675 days.
The data was something like this. According to official documents show that Apple, iPhone mobile phone battery charge and discharge in full after the 400 could reach 80% of the total electricity consumption. After user feedback, iPhone an average of 30 hours a need to recharge, PC Mag is the result of precise measurement 34 hours (which is estimated for charging an average of 1.5 days). The Apple iPhone is fully charged, the time is 4 hours. In accordance with the best of the situation and at the same time to each battery charge after the loss of electricity is included in the calculation, the battery life is 675 days.
Even in the off-line program, enter their mobile phone to buy Apple’s iPhone will be able to arrive at the date of the date of the batteries need to be replaced
Some users have already released the iPhone to extend mobile phone battery life.
Upgrade to the latest software upgrade to the latest iPhone will allow more power.

3. At least once a month full charge and discharge your mobile phone iPhone, so the ibm FRU 92P1139 battery can be maintained at its best.
When you use the iPhone do not remember a time when mobile phone screen lock.

4.’s Not the best time to turn off wireless and Bluetooth.
Open the automatic brightness adjustment, this feature can help save power.
Turn off the music player’s equalizer settings. Can contribute to saving energy.

Cell phones should be in line with the standards which
A standard cell phone battery performance should be as follows:

Appearance: cell surface texture color clear, uniform, clean, no scratches and damage; Dell Inspiron 500m battery labels should be printed on the battery type, the type, rated capacity of the standard voltage, the signs are negative, the manufacturing plant, 000. On the phone when they want to handle non-blocking smooth, elastic appropriate, and with good hands, a reliable locking; metal piece no scratches and black hair is green.

Battery Performance: standby time, talk time is actually a relative concept, test the Dell Inspiron 510m battery capacity of the consumer is a comprehensive, that is, standby, talk time at the same time. Simply put, the battery’s rated capacity should not be less than the standard size of 95% of the full power to place 28 days, the minimum capacity of not less than 60% of rated capacity, battery life of less than 400 times.

Safety: cell phone Dell Inspiron 600m battery over-current protection should be internal, external, and so lead to short-circuit current is too large, automatically cut off the loop, so as not to burn or damage to the cell phone; lithium-ion batteries have been sufficient to protect the other line, when the use of non-standard electrical appliances , To pay too much electric current when the power supply will automatically cut off, do not charge into the lead in normal cells, can automatically back to the turn-on status.

Termination of the charging control functions: mobile phone Dell Inspiron 6000 battery should be an internal temperature sensor, battery charger to charge for the provision of temperature signals the end of the charging control.

Production technology and raw materials: the production of cell phone technology is not complicated, but why cell phone market, the passing rate so low? Here there are two main reasons: First, manufacturers in pursuit of illegal profits and reduce costs, lower prices in order to scramble the market, used improper means to use defective materials or even scrap the assembly cell phone Dell Inspiron 630m battery; and the other is in the process of cell production of a number of key Factors have not been strictly controlled and to use components caused by incorrect parameter, so consumers should be chosen carefully to identify their true strengths and weaknesses

At present, the cell phone of the brand has many good and the bad. However, there are a lot of the market is flooded with fake batteries so that consumers can buy batteries when difficile truth, not to gain the upper hand. In addition, some illegal phone dealers, the sale of real cell phone equipped with mobile phone batteries, in order to reap illegal profits. Short battery life is not only false but also because of damage to voltage instability in the highly mobile phone. Consumers should be in the following areas to identify the authenticity of cell phone batteries. Dell 1691P battery

First, the length of standby time
Battery standby time is a measure of the length of the pros and cons of an important indicator of Dell 3149C battery. Battery standby time is the length of the battery constitutes a single battery charge of the balance of the decision. Really battery standby time and a detailed description of the logo should be basically the same. The false identification only half the time. The number of poor-quality batteries are used in the secondary Dell Y9943 battery for core kernel, together with the new packaging by the assembly. If the seller does not guarantee standby time in line with the prospectus, you will not be able to buy the batteries. Some sellers in all sincerity and seriousness, in fact, he did not know the actual battery capacity, more than just oral. This Dell 6Y270 battery is generally poor quality of cell manufacturing. If the purchase of stand-by found a short time, the request should be returned immediately.

Second, the battery capacity
Cell phone batteries for the general capacity of 1000 mA / hour or two 1000mah. Some did not leave the battery capacity of the logo, the logo has also illegible. Can also get the battery cell phone repair shop to measure current, so as to the authenticity debate. Now we are using lithium batteries, lithium batteries and is similar to sections 5 and 7, the size of the batteries together, with switchgear and protection of the circuit. Therefore, it has a certain weight. If you buy a lithium battery light on the core battery capacity, the batteries may be a problem. General 900mah lithium battery core weight 35g, if a piece of the Dell 75UYF battery cell batteries and other equipment and lack of casing the weight of 35g, this battery that may be false.

Third, security
Cell phone Dell U4873 battery are flammable and explosive materials, if not an internal battery protection circuit, easily deformed, leakage, or even an explosion. However, many low-quality batteries at low prices to attract consumers to remove the piece of circuit board protection, in order to earn greater profits. This market has a lot of unsafe batteries, it is difficult to identify from the appearance. The best time to buy a regular mall to buy Telecom.

At present, the market’s three main mobile phone batteries: Lithium-ion batteries, nickel-metal hydride batteries and nickel batteries. As a result of the largest-capacity lithium-ion batteries, long standby time, light and mobile phone battery is the main species. So, above all lithium-based Dell TC023 battery

BYD to attract investment in Buffett Bao Zhang, as well as short-term stimulus, the A-share market again today to start the charger.htm”>hp dp390a battery plate, today is far to branches force, headed by Desai, such as battery power batteries subject to collective shares trading again broke out of the market One of the few bright spots. Their common characteristic is that production and BYD as the nickel-hydrogen toshiba pa3285u-1brs battery used car! And in high-Ju (600,872) also has substantial nickel-hydrogen  ibm 92p1101 battery vehicle concept, the company’s holdings in subsidiaries Ju Sen Lai is the development and production of high-tech family of Ni-MH battery and mobile power accessories and professional company 100AH production of nickel-metal hydride battery power is widely used in electric cars, electric motorcycle! And the Hong Kong-listed BYD available nickel hydrogen sony pcga-bp2nx battery have the same things, is full of shock! In addition, the rate cut, as well as a number of positive aspects of the real estate is expected to rumors, the real estate board strength in recent days in a row, becoming the biggest bright spot where the disk. Against the background of the case, we believe that as the last adjustment to one of the largest groups in the medium and long-term good for the basic setup, the real estate sector is expected to enter the ring in an ambush of the Group of funds, short attention focused on the center line performance. Only 3 yuan at current prices in more than 600,872 high-Ju also has substantial real estate subject matter point and we need to grasp. Commendable that the torch high and new majority shareholder in the Sept. 24 announced that it has started in the secondary   ibm thinkpad t40 battery market holdings in high-Ju 600,872, and that the latter will continue to be overweight, we can see that the majority shareholder of the company’s future growth prospects Is filled with full confidence. As a result, we have reason to look forward to in high-Ju broke up strength at any time, investors pay close attention to the recommendations.

Authoritative analysis revealed that the new energy sony PCGA-BP71 battery Buffett’s concern will be the new energy industry in particular, nickel-hydrogen battery car with an injection of stimulants. Show that high-owned subsidiary of Ju Ju Sen Lai is in the development and production of high-tech family of nickel-metal hydride batteries and power supplies and accessories for mobile communications professional, complete with nickel-cadmium, nickel metal hydride battery production and testing equipment, with an annual output of the Type of battery 20,000,000 Ah. At present, the hybrid electric vehicle apple a1079 battery power to reach more than 700-800W/kg, pure electric vehicle battery power to reach more than 60 ~ 65kWh/kg, is a leader in the domestic level, has been widely used in electric cars, electric motorcycles, and other products. In addition, the focus should be concerned that the company always stick to integrate research in the field of battery power has made brilliant achievements. A number of companies in the country \ “863 \” projects, had made 3 national patents, more than 10 inventions and utility model patents, a total of more than 10 projects through the Ministry of Science and Technology acceptance. Co-Sen Lai Ju in Beijing Institute of Technology and the National Center for the development of high-tech green materials, such as two universities and research centers focused on research “QNYD6 hybrid with nickel hydrogen ibm 40y6797 battery ”, the main research and development of hybrid electric vehicle driving force nickel Hydrogen batteries, will provide technical Chang’an Automobile Company hybrid car to provide power solutions. Not long ago, the project has been certified by experts, is expected to market new products, the company continued to power batteries to inject vitality into the development! The company expects sales revenue within three years and annual profit will be 25% -30% of the increase will be the company’s strong profit growth!

Try for hair-trigger adjustments in place

Secondary market, the battery as a power point themes of the black variety, only 3 yuan of the early strength of the unit in the late necessarily attract the coveted institutions in order to looting out of the market. Graphics, the unit has been a modest 4 consecutive trading days Pansheng shock, the dell d7310 battery market outlook is expected to speed up the try for sun up, focus on the recommendations.

At present, the market used rechargeable batteries are nickel metal hydride (Ni-MH) and lithium-ion (Li-ion) are two types. Lithium-ion batteries have been in mass production of liquid lithium-ion battery (LiB) and lithium-ion polymer battery (LiP) two. Therefore, in many cases, the battery mark on the Li-ion and lithium-ion battery is a must. But that is not necessarily liquid lithium-ion battery, is also possible that the polymer lithium-ion dell U4873 battery .

Lithium-ion battery is a lithium battery improved version of the product. Lithium batteries have a long time ago, but the lithium is a highly active (remember that the its position in the periodic table?) Of the metal, it is not safe when used often in charge when burning, the burst , Then there is the improved version of the lithium-ion batteries by adding the element lithium can inhibit the active ingredients (such as cobalt, manganese, etc.) so that the lithium power to achieve real security, efficient and convenient, and the old lithium batteries also Basically eliminated. As to how to distinguish them from the battery on the logo will be able to identify, lithium batteries for Li, lithium-ion battery for Li-ion. Now, notebook and mobile phone use of the so-called “lithium batteries”, in fact, are lithium-ion battery.

The basic structure of modern batteries, including cathode, anode and electrolyte of the three elements. As a battery, lithium-ion battery with the same three elements. Lithium-ion technology in general or the use of inorganic colloidal liquid electrolyte, it needs to accommodate case solid combustible active ingredient, which increased the battery’s weight and cost, but also limits the size and design flexibility. In general, liquid lithium-ion secondary sony PCGA-BP2NY battery   is the minimum thickness of 6mm, and then to reduce the more difficult.

The so-called polymer lithium-ion batteries in three of the main structure at least one or more polymer materials used as the main battery system.

A new generation of polymer lithium-ion polymer batteries in the extent of the already very high, so the shape can be shaped and thin (the thinnest 0.5 mm), of any size and any shape, and greatly increased battery design flexibility , In order to meet product demand, made in any shape and capacity of the battery. At the same time, lithium-ion polymer battery unit of energy than current lithium-ion batteries in general increased by 50% of its capacity, charge and discharge characteristics, security, operating temperature range, cycle life and environmental performance in areas such as lithium-ion batteries are relatively large The rate increase.

Currently on the market by sales of liquid lithium-ion (LiB) in the over-charging the battery case, thus easily lead to the breakdown of the fire safety situation, it is very dangerous, so to install the necessary protection to ensure that the cell line IC will be no over - Charge. The polymer lithium-ion battery, this type of cell relatively liquid lithium-ion sony VGP-BPS5 battery   in terms of good-resistant properties of charge and discharge, so the protection of Canada’s IC circuit requirements can be relaxed. Also in charge, the polymer lithium-ion batteries can be recharged using IC will be current with the lithium-ion rechargeable battery used in CCCV (Constant Currert-Constant Voltage) charge means the time required for comparison, can shorten the waiting time for many.

A sofa, a comfortable cushion attention to life

To drink, sitting cross-legged on the sofa, placed above his beloved books, pulled out the PA3356U-1BRS and then connected to the power supply. Look at the movies, chat with friends, really happy. However, the use of such methods, may be you and your books will cause a bad result. In that case, we can do?

First of all, the use of books when not to pull the battery, this is a book you harm, as opposed to a smooth desktop environment, the use of legs books, books of the force is very uneven, the battery power supply not only play a role At the same time, there is support, strengthening the overall structure of the book’s purpose, so good on the installation. Secondly, on the use of legs and unwise choice, the majority of notebook computers are relying on the heat at the bottom of the distributed, on the legs, may be a long time to burn the skin, more seriously, with a wireless-enabled Book will cause you physical harm. Therefore, it is better to put books on the sofa arm, or buy a special bed with the laptop computer tables, such as convenient to use as they please, do not have books, you yourself, what damage.

II. Charger, with discharge of skills is important
Today, most of the books used in lithium-ion PA3384U-1BRS , the length of their life rather than by the use of the time, but by the charge and discharge to determine the number of times. At the same time, all of the books also have a rechargeable power supply circuit, and is not a simple straight. Some friends ask how much battery power is appropriate to retain it?

According to experience, the residual battery power is best not to less than 5% of the total electricity consumption, but in order to prevent the movement of temporary use, the battery charge threshold set at 30% - 50% more reasonable.

III. Can not be ignored details of the power to cut off
Notebook PC, compared with the characteristics of the biggest features of a site is closed, the notebook automatically hang, the state’s electricity consumption will be. A short period of time to leave, which is very useful, but left a long time, or do not use this feature for good. Because it will bring about the installation of hidden dangers, other home appliances such as TV, DVD Player, in a long time no one at home, it is best to cut off the power, do not let a low-power standby state. In that case, the loss of the notebook features ibm battery, the normal start of the people so agitated and so on, there will be no other way to it?
Notebook also has a function - sleep, for example, Thinkpad notebooks use a combination of keys is fn + F12, press this key combination, you will be prompted to enter hibernation, the difference is that this time will deal with all of you, running The document, the preservation process, press the start button next time, directly after the completion of the self-read temporary files, boot time greatly shortened. Even better is that this feature will not wear and tear of power, features more than hang with Oh!

Look at popular science books as a child, learned through training in mice with the roller cage in one direction on North Korea to carry out running for the next generation to provide electricity, very strange. But the idea of the industry and the latest ideas, it is necessary to the far less. In order to get laptop power supply to support a longer period of time, the industry invented a patented technology: the keyboard charger.

Keyboard charger

The charger is a key concept: a magnet assembly in a number of keys on the keyboard, power button mounted on a coil seat, tapping the keyboard when the user when the magnet coils in the campaign, resulting in induced current, the current through into later To come to the battery charge. It is said that those gathered by tapping the energy of the keyboard, battery life can be increased by 20%. To be playing a joke, the proposal in its notebook computer casings on the coat light bulbs, power failure or Zouye Lu day when beating the keyboard to lighting, is really called “flashlight.”

Energy-saving notebook is a request

Not long ago, playing one of the old 386 laptop, which does not drive, multi-media did not, of course, can not keep up with current notebook fun, but one thing I feel deeply that the battery seems to be very durable. Although there is no computer is now 386 strong computer 3D and multimedia features, but from the word-processing needs of the energy point of view, it is much more energy. In all fairness, the notebook is really not as easy to use desktop, the reason why we use the notebook computers, because we lack a fixed quietly sitting in one place of business conditions, so we have to move office, so we are not the notebook computers for the completion of the What 3D design and video production, not what is used to playing three-dimensional simulation of the game, all the basic word processing, data and Internet use, such as office and therefore may not need the latest CPU and strong 3D accelerator card, it is necessary to know that these two components in the Desktop are in need of cooling fans, that is to say they are energy-hungry. If you care about battery time-keeping, you buy the laptops when they should take these factors into account.

Nickel-metal hydride batteries and lithium batteries

At present, the major notebook computer batteries using both: Ni-MH battery and lithium batteries. Since there are two types of cells exist in the market, of course, also have their advantages and disadvantages. The most obvious one, that is, we buy cell phones when they have made very clear that the Ni-MH battery cheaper than lithium batteries, its negative side is the relative size and weight of larger. Lithium batteries with these characteristics is just the opposite. As the user like lighter, thinner, longer battery maintenance of the notebook computer, so lithium batteries subject to the pursuit of more high-end products favored by the user.

Charging techniques

A number of lithium batteries is equipped with notebook computers, such as the use of the wisdom of the SBS battery technology, accurate measurement of battery life, so to use up some of the worry. The use of nickel-metal hydride batteries should be careful not to over-charge frequently, or else they will reduce the battery life, so to very good control of the charging time.

Ni-MH battery charge in the pre-discharge should be in charge should be fully recharged, the use of methods and the use of mobile phones and pay attention to issues of Ni-MH battery is the same. Bought a new nickel-metal hydride battery cell phone, require the completion of three fully charged and discharged after a normal start to use it, the laptop battery should also be the case.
02K6618，02K6619，02K6620，02K6621，02K6626，02K6627，02K6632，02K6633，02K6644，02K6645，02K6647，02K6648，02K6649，02K6651，02K6653，02K6687，02K6690，02K6691，02K6710，02K6740，02K6741，02K6743，02K6758，02K6760，02k6762，02k6763，02K6821，02K6822，02K6823，02K6824，02K6825，02K6829，02K6830，02K6832，02K6845，02K6846，02K6919，02K6923，02K6924，02K6928，02K7016，02K7018，02K7022，02K7025，02K7026，02K7028，02K7034，02K7037，02K7038，02K7039，02K7040，02K7050，02K7051，02K7052，02K7053，02K7054，02K7055，02K7056，02K7057，02K7058，02K7059，02K7060，02K7061，02K7072，02K7073，08K8024，08K8026，08K8035，08K8036，08K8039，08K8040，08K8045，08K8048，08K8182，08K8183，08K8184，08K8185，08K8186，08K8192，08K8193，08K8195，08K8196，08K8197，08K8198，08K8199，08K8201，08K8214，08K8218，10L2158，10L2159，12J2464，2P1013，40Y6791，40Y6793，40Y6795，40Y6797，40Y6799，40Y7001，41N5666，73P5167，73P5168，92P0987，92P0988，92P0989，92P0990，92P0999
Most users accustomed to the use of each notebook computer, plug the AC power supply, with very little battery power for laptops. In fact, at least a month should be used to power batteries once or twice, the battery will be fully used up, followed on a one-time full of alternating current. Remember this one: rechargeable batteries, dry full charge, useful and friendly, just do it a little trouble.

When the need to replace notebook batteries, preferably with a selection of models to replace the battery. However, if the old computer is to use nickel-metal hydride batteries, in order for longer battery-powered, of course, can also be specified by the computer user’s manual or manufacturer’s recommended selection of models of lithium batteries.

How to set up energy conservation

Desktop using alternating current, the majority of energy-saving features of the computer may not be very great importance, but it needs to use battery-powered laptop computer, the use of energy-saving features should be taken seriously. How to design computer hardware more energy-saving, this is not a user problem to be solved. Users can do on the computer is set up on the efficient use of energy-saving options.

Energy-saving two set-conditioning needs of users: First, the computer’s BIOS setup program on energy-saving way in the set; most important thing is that the Windows 98 operating system, such as many energy-saving settings and operation. Computer systems in the practical implementation of it, Windows system should take precedence over energy-saving settings in the CMOS settings.

1. BIOS settings in the energy-saving

In the CMOS settings, has a large “Power Savings”, which can choose to “Maximum Battery Life” and “Maximum Performance” and other options. “Maximum Battery Life” is the default mode of energy-saving settings. The notebook has several energy-saving mode, such as Idle Mode idle mode, Standby Mode standby (wait) mode, Suspend Mode suspension (sleep) mode. The notebook computer settings, have been able to regulate power consumption, mainly in energy-saving computer into the state, the timely closure of some of the equipment without the use of the system. If the state of waiting, turn off the display and hard drive; into the dormant state, in addition to the closure of the display and hard drive, memory can also save the contents of your hard disk, the entire computer system shut down to maintain the basic state, once activated, or restart the computer, desktop Will return to the precise state of dormancy before. In the energy-saving settings in the CMOS, mainly set up by Idle Mode to enter Standby Mode of the Standby Timeout time set by the Standby Mode to enter Suspend Mode of Suspend Timeout. Notebook computers use most of the Phoenix BIOS. Various energy-saving BIOS settings may be somewhat different, it should carefully read the screen prompts.

2. Windows of energy-saving settings

For the average user, in the Windows system for the management of energy-saving operation may have a better understanding of some simple. Windows help file, “the management of hardware and software” entries, two laptop computers and energy-related content: “Energy Management” and “the use of portable machine,” “management on the laptop power supply.” Energy-saving settings in Windows, you should read it.

In the Windows “Control Panel”, click “power management”, will be able to open the “power management attributes” dialog box. As shown in Figure 1, “Power Management Properties” dialog box, should “use of power” set to “Portable / laptop” and reasonable arrangement “to wait for the system” and “turn off monitors,” ” The closure of the hard disk “option. Different computers can have some options to manipulate the differences in the new factory-to-date computer and the software will be more workable option, the details should be set up in accordance with its own computer functions and help files for Windows.

If the need to completely run out of battery power, do not look for other ways to discharge anything, only the “power management attributes” dialog box will be the “power scheme” is set to “always open” and will “wait for the system” and “shut down Monitors “and other options set to” never “, but also allows the computer automatically calculate a number of complex 3D demo program, which will soon be able to use the remaining dry battery power, of course, when these do not forget to dispose of Unplug the AC plug.

Q: My laptop heat too, how well?

A: The notebook computer as a result of space caused by poor cooling effect. If you use a notebook with a lock on, and with their hands thoroughly is a hot plate, because most of the heat caused by bad, you put the laptop in bed used? Notebook computer batteries because of the need to use, the design of the power attached great importance to the management, if the statement on the notebook power management and more understanding of the serious implementation, so that power consumption could be more reasonable and effective, this notebook will have the power Less so as to distribute heat in the form of swap.

Q: In the notebook computer using the AC when the battery machine with the need for removable?

A: When using the AC, built-in battery is not in power, but they too are charging. Therefore, it would be better to remove the battery, this battery will be more durable.

Q: Can long-term notebook computer using the AC?

A: Of course it can, and I am sure that some notebooks, “lifetime” is only used alternating current.

100 per cent in Wuhan City convenience store recycling of used batteries “fruitful.” From September 28 to yesterday, a total of 79,881 recycling of used batteries. Tomorrow, the first batch of waste batteries will be innocuous treatment.

From last month, 28, Wuhan, a large-scale recycling of used batteries, the battery used to pay members of the public, government subsidies means that in a hundred in 100 convenience stores to set up recycling of used batteries, the public can exchange the equivalent of used batteries, a battery Convertible equivalent of a dime goods.

According to the recent recovery of the situation, the flow of people Center shops or large supermarkets, large amount of recovery. Jixian bridge at the mouth in a hundred in convenience stores supermarkets see that the battery used to pay members of the public, the majority of middle-aged and elderly. People exchange goods for tissue products, bags, mineral water, chewing gum, lollipops, melon seeds, spices and so on.

At present, the Wuhan Grammy cycle Limited resources have been focused on a number of used batteries, to a unified storage Baishazhou Zhangjiawan temporary storage, the first batch of Tomorrow waste batteries will be sent to the Jingmen Center for harmless disposal. BAT-I2600，BAT-I3500，BAT-I5000，BAT-X200，BDM01，C1295，C2174，C5331，C5340，C7786，CG036，CG039，D5540，D5561，D7310，DF192，DF230，DF249，F0590A01，F0993，F1244，F1450A，F5136，FF232，FG442，FK890，FT080，G1947，G2053A01，G5226，G5266，G5345，G9812，GG386，GK479，GR986，GR995，GW240，GX047，H5559，H9566，HD438，HF674，HP297，IM-M150258-GB，IM-M150261，IM-M150261-FR，IM-M150261-GB，IM-M150290-GB，IM-M150714-GB，J2178，JD634，KD186，KG046，M5701，MM165，NF343，NR222，NR239，PC764，PD942，PD946，RC107，RD850，RD857，RD859，RN873，T5443，T6840，TC030，TD175，TD344，TD347，TD349，U1544，U4873，U6256

Wuhan Urban Management Bureau said that in order to prevent for-profit organizations and individuals through the acquisition of used batteries to store commodities exchange, according to the General Office of the Wuhan Municipal Government on the recycling of used batteries of the documents, a one-time supermarket to buy used batteries should not more than 50 / People.